Original Industrial Spare Part

Endress+Hauser COV45-41TN1 Service-Ready Spare Part

Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.

SKU: COV45-41TN1 PLC & Industrial Automation Modules Endress+Hauser

RFQ Ready

Pricing by RFQ

How Buyers Usually Use This Page

  • Confirm the exact part number and platform family before sending the quote request.
  • Use direct email when quantity, condition, and destination are already defined internally.
  • Switch to the broader brand or category archive when you need alternates nearby.

Series Navigation

Move through the most common platform families behind this part.

Endress+Hauser COV45-41TN1 Service-Ready Spare Part for Industrial Maintenance

The Endress+Hauser COV45-41TN1 is a service-ready Vibronic level switch spare part engineered for demanding industrial environments. Whether you are managing a scheduled annual overhaul, responding to an unplanned process shutdown, or building a strategic spare parts inventory for a critical production line, the COV45-41TN1 delivers the reliability and compatibility that maintenance and procurement engineers depend on. Sourced as an original spare, this unit is fully tested prior to shipment and backed by a 12-month warranty, giving your team the confidence to restore operations quickly and maintain uptime targets.

The Vibronic measurement principle used in the COV45-41TN1 — based on a vibrating fork or rod driven at its natural frequency — makes it exceptionally resistant to turbulence, foam, buildup, and varying product densities. This robustness is precisely why the COV45 series remains a preferred choice in chemical processing, food and beverage, water treatment, and bulk solids handling facilities worldwide. When this device fails or reaches end-of-service life, a like-for-like replacement with a genuine COV45-41TN1 eliminates the risk of compatibility issues, recalibration delays, and process re-validation that often accompany cross-brand substitutions.

Spare Maintenance Table

Parameter Specification / Detail
Part Number / SKU COV45-41TN1
Brand Endress+Hauser
Series Liquiphant / Soliphant COV45
Product Type Vibronic Level Switch (Point Level Detection)
Measurement Principle Vibrating fork / tuning fork resonance
Process Connection Threaded / flanged (per variant configuration)
Output Signal Relay / transistor switching output (NAMUR or standard)
Supply Voltage Typically 19.2–253 V AC/DC (confirm with datasheet)
Ingress Protection IP66 / IP67 (dust-tight and submersion-resistant)
Ambient Temperature –40 °C to +70 °C (electronics)
Process Temperature Up to +150 °C (media contact, confirm per variant)
Compatibility Direct replacement for COV45 series; compatible with FEL50, FEL56, FTL50, FTL51 mounting configurations
Origin Germany (DE)
Condition Original spare, new-in-box
Pre-shipment Testing Function-tested and inspected before dispatch
Warranty 12 Months from date of shipment
Lead Time In-stock units ship within 1–3 business days
Application Sectors Chemical, Pharmaceutical, Food & Beverage, Water Treatment, Bulk Solids
Maintenance Interval Inspect annually; replace on failure or at 10-year service life

Maintenance Planning for Continuous Operation

Replacing the COV45-41TN1 in the field is rarely an isolated task. Experienced maintenance engineers know that a level switch failure is often a symptom of broader stress on the measurement loop or the control cabinet. When scheduling a COV45-41TN1 replacement, a thorough site inspection should cover the following associated components to prevent repeat failures and maximize the value of each planned maintenance window.

Begin with the power supply module feeding the level switch circuit. Endress+Hauser RN221N or equivalent loop-powered barriers and Zener barriers should be checked for output voltage stability and isolation integrity — a degraded barrier can cause erratic switching behavior that mimics a faulty COV45-41TN1. Next, inspect the FEL50 or FEL56 evaluation electronics if your installation uses a remote version of the Vibronic sensor; the electronics unit and the fork probe are separate wear items and should be assessed independently.

Review the terminal blocks and field wiring in the junction box. Corroded or loose terminals on the two-wire loop are a common source of nuisance trips. If the COV45-41TN1 is wired into a Pepperl+Fuchs or MTL signal isolator, verify that the isolator’s output is within specification — a failing isolator can mask a healthy sensor or falsely indicate a fault. For installations integrated into a Siemens S7-300 or S7-1500 PLC digital input card, confirm that the DI channel threshold voltage is correctly configured for the sensor’s output type (PNP/NPN or NAMUR).

If the COV45-41TN1 is part of a safety instrumented function (SIF), cross-reference the Endress+Hauser RIA15 or RIA16 process indicator on the same loop to confirm that the displayed status matches the physical process level during commissioning. Check the FTL50 or FTL51 companion units on adjacent vessels — these share the same COV45 platform and are likely at a similar service age. Replacing them proactively during the same shutdown avoids a second unplanned outage within months.

For control cabinet integrity, inspect the 24 VDC SITOP or Phoenix Contact power supply rail voltage under load, the relay output module that the COV45-41TN1 drives, and any surge protection devices (SPDs) on the field cable entry. Finally, verify that the cable gland and conduit seal at the sensor head remain intact — moisture ingress at this point is the leading cause of premature Vibronic sensor failure in outdoor or washdown environments.

Site Replacement Workflow

Step 1 — Isolation and permit: Isolate the process vessel, depressurize, and obtain a confined space or hot-work permit as applicable. Lock out the 24 VDC or AC supply to the COV45-41TN1 circuit at the control cabinet.

Step 2 — Documentation: Photograph the existing wiring, tag positions, and process connection orientation before removal. Record the current PLC input status (energized/de-energized) to confirm the fail-safe logic direction.

Step 3 — Removal: Disconnect the two-wire field cable at the terminal head. Unscrew the process connection (G¾ or NPT thread, or unbolt the flange). Remove the old COV45-41TN1 and inspect the process nozzle for corrosion or thread damage.

Step 4 — Installation: Apply fresh PTFE tape or a suitable thread sealant. Install the new COV45-41TN1 to the specified torque. Reconnect the field cable, observing polarity. Restore power and confirm the LED status indicator on the sensor head shows the correct operating state (green = OK, red = fault or covered).

Step 5 — Functional test: Simulate a covered and uncovered condition (using a test magnet or by physically covering the fork) and verify that the PLC input changes state correctly. Document the test result in the maintenance management system (CMMS).

Step 6 — Return to service: Update the asset tag with the new serial number and installation date. Log the replaced part in your spare parts consumption record to trigger a reorder and maintain minimum stock levels.

Spare Parts Support FAQ

Q1: Is the COV45-41TN1 a direct drop-in replacement for older COV45 variants?
Yes. The COV45-41TN1 is designed as a service replacement within the COV45 platform. The process connection dimensions, electrical interface, and switching logic are consistent across the COV45 series, allowing direct substitution without mechanical modification. Always verify the process connection size and output type (relay vs. NAMUR) against your existing installation datasheet before ordering.

Q2: What does the 12-month warranty cover, and how is a claim handled?
The 12-month warranty covers manufacturing defects and functional failures under normal operating conditions from the date of shipment. If a unit fails within the warranty period, contact sale@ninermas.com with the order reference and a description of the fault. We will arrange a replacement or repair at no additional cost. Warranty does not cover damage caused by incorrect installation, overpressure, or chemical incompatibility.

Q3: How should I manage COV45-41TN1 inventory for a multi-site facility?
For facilities with more than five COV45-series devices installed, we recommend maintaining a minimum of one spare unit per site. For critical applications (high-level safety shutoffs, custody transfer vessels), a two-unit buffer is advisable. Given the COV45-41TN1’s typical 10-year service life, a rolling replacement program — replacing the oldest units during planned shutdowns — reduces emergency procurement risk and keeps your installed base within a predictable age band.

Q4: Can you supply COV45-41TN1 units for long-term framework agreements or blanket orders?
Yes. NINERMAS supports long-term supply agreements for industrial spare parts, including the COV45-41TN1. Framework agreements allow you to lock in pricing, guarantee stock allocation, and simplify procurement across multiple purchase orders. Contact our team at sale@ninermas.com or +0086 187 5021 5667 to discuss volume requirements and delivery schedules.

Product Series

Other series

Country of Origin

CH

Catalog Continuation

More Endress+Hauser modules in the catalog.

Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.

Open this lane

Catalog Continuation

Alternative parts within PLC & Industrial Automation Modules.

Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.

Open this lane

Industrial RFQ Support

Need a fast quote for a specific part number or system family?

Send your inquiry with brand, series, quantity, condition, and destination details. We will follow up on availability, lead time, and shipping options.

CallPhone MailEmail WAChat TopBack