Original Industrial Spare Part
ABB TK801V006 3BSC950089R2 Service-Ready Spare Part
Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.
RFQ Ready
- SKUTK801V006 3BSC950089R2
- CategoryDCS Distributed Control Systems
- BrandABB
- SupportAvailability, lead time, condition, and shipping coordination
How Buyers Usually Use This Page
- Confirm the exact part number and platform family before sending the quote request.
- Use direct email when quantity, condition, and destination are already defined internally.
- Switch to the broader brand or category archive when you need alternates nearby.
Series Navigation
Move through the most common platform families behind this part.
Product RFQ
Send this part directly for quotation.
Include quantity, required condition, destination country, and target delivery timing. Current reference: ABB TK801V006 3BSC950089R2 Service-Ready Spare Part with SKU TK801V006 3BSC950089R2.
ABB TK801V006 3BSC950089R2 Service-Ready Spare Part for Industrial Maintenance
The ABB TK801V006 (3BSC950089R2) is a ModuleBus communication cable designed for use within the ABB AC800M controller platform — one of the most widely deployed DCS/PLC architectures in process automation, power generation, and discrete manufacturing. When this cable fails or degrades, the entire ModuleBus segment loses communication integrity, causing I/O modules to drop offline and triggering unplanned shutdowns. Stocking a verified, service-ready replacement is the single most effective way to reduce mean time to repair (MTTR) and protect production continuity.
At NINERMAS, every TK801V006 unit is sourced from authorized supply channels, inspected against ABB’s original dimensional and electrical specifications, and dispatched with full test documentation. Our 12-month warranty covers manufacturing defects and ensures you receive a component that performs identically to the factory-fitted original — critical when your control system cannot tolerate substitution risk.
Spare Maintenance Table
| Parameter | Specification |
|---|---|
| Part Number | TK801V006 |
| ABB Order Code | 3BSC950089R2 |
| Series / Platform | AC800M ModuleBus |
| Component Type | ModuleBus Communication Cable |
| Interface | ModuleBus (proprietary ABB backplane bus) |
| Cable Length | 0.6 m (nominal) |
| Connector Type | Dedicated ModuleBus plug — both ends |
| Compatible Controllers | PM861, PM864, PM866, PM891 (AC800M family) |
| Compatible I/O Modules | S800 I/O series (AI810, AO810, DI810, DO810, etc.) |
| Operating Temperature | 0 °C to +55 °C |
| Storage Temperature | −25 °C to +70 °C |
| Installation Environment | Industrial control cabinet, DIN-rail or rack-mounted enclosure |
| Origin | Sweden (ABB Automation Products) |
| Condition | New / Service-Ready |
| Warranty | 12 Months — covers manufacturing defects |
| Lead Time | In-stock: ships within 1–3 business days |
| Test & Inspection | Pre-shipment functional verification included |
Maintenance Planning for Continuous Operation
The TK801V006 ModuleBus cable sits at the heart of the AC800M backplane communication chain. A single cable fault can cascade into a full I/O segment outage, so experienced maintenance engineers treat it as a consumable — not a long-life component. During scheduled annual shutdowns or quarterly control cabinet inspections, the cable should be visually checked for connector wear, jacket cracking, and secure seating at both the PM864 or PM866 controller module and the downstream S800 I/O baseplate.
When planning a TK801V006 replacement, a thorough site engineer will simultaneously audit the surrounding electrical environment. The SD802 or SD803 power supply module feeding the I/O rail should be load-tested; a marginal power supply is a common root cause of intermittent ModuleBus faults that are incorrectly attributed to the cable. The TB820 or TB840 ModuleBus Terminator at the end of the bus segment must also be confirmed present and correctly terminated — missing terminators cause reflections that mimic cable failure symptoms.
Beyond the bus itself, the replacement workflow should include a check of the CI854 or CI858 PROFIBUS/PROFINET communication interface module if the AC800M system bridges to a field network, since a degraded ModuleBus segment can corrupt upstream fieldbus diagnostics. Maintenance teams working on older installations should also inspect the TP830 or TP854 termination panel wiring for loose ferrules and oxidized terminals, which introduce ground loops that stress cable insulation over time.
For facilities running redundant AC800M architectures, the PM891 redundancy controller and its associated SC520 or SC522 serial communication module should be verified for correct switchover behavior after any ModuleBus cable replacement. A replacement that restores communication on the primary path but leaves the redundant path degraded creates a false sense of security. Similarly, any AI835 or AI845 analog input module on the affected I/O segment should be re-ranged and calibrated after the bus is restored, as signal drift can occur during a communication interruption.
Procurement engineers sourcing TK801V006 for multi-site operations should consider establishing a minimum stock level of two units per AC800M rack. The cable’s relatively low unit cost compared to the production loss from a single unplanned outage makes buffer stocking straightforward to justify in any maintenance budget review.
Site Replacement Workflow
Step 1 — Isolate and document. Before disconnecting the TK801V006, record the current ModuleBus segment topology using the ABB Control Builder M engineering tool. Export the hardware configuration so that module addresses and I/O assignments are preserved for post-replacement verification.
Step 2 — De-energize the I/O segment. Switch the affected S800 I/O baseplate to its local power-off state using the SD802 power supply’s enable switch. Do not remove the cable under live bus conditions — hot-swap is not supported on the ModuleBus physical layer.
Step 3 — Remove the legacy cable. Depress the connector locking tab on both the controller module and the I/O baseplate, then withdraw the TK801V006 straight out without twisting. Inspect the vacated connector ports for bent pins or debris before inserting the replacement.
Step 4 — Install the new TK801V006 (3BSC950089R2). Align the keyed connector and press firmly until the locking tab clicks. Verify cable routing does not create a bend radius tighter than 30 mm, which can stress the internal conductors and cause intermittent faults.
Step 5 — Re-energize and verify. Restore power to the I/O segment and observe the module status LEDs. All I/O modules should return to RUN state within 10–15 seconds. Confirm in Control Builder M that all module addresses are recognized and that no diagnostic alarms remain active.
Step 6 — Functional test. Force-test a representative selection of digital and analog I/O channels to confirm end-to-end signal integrity before returning the system to automatic control. Document the replacement in the site maintenance log with the new cable’s serial number and installation date.
This workflow applies equally when upgrading from an earlier TK801V006 revision or migrating from a third-party cable that was used as a temporary fix. The 3BSC950089R2 order code ensures you receive the current production revision with the latest connector specification.
Spare Parts Support FAQ
Q1: Is the TK801V006 (3BSC950089R2) compatible with all AC800M controller revisions?
Yes. The TK801V006 is the standard ModuleBus interconnect cable for the entire AC800M family, including PM861, PM864, PM866, and PM891 controller modules, across all hardware revisions. It is also compatible with all S800 I/O baseplates that use the standard ModuleBus connector. If your installation uses an extended-length segment, verify the total bus length does not exceed ABB’s specified maximum before ordering additional cables.
Q2: What is included in NINERMAS’s pre-shipment testing for this part?
Each TK801V006 unit undergoes a visual inspection of connector integrity, cable jacket condition, and locking tab function before dispatch. Units are packaged in anti-static, moisture-resistant packaging to prevent transit damage. A test report is available upon request for customers with quality management system requirements. The 12-month warranty period begins from the date of shipment.
Q3: How should I manage long-term spare parts inventory for AC800M ModuleBus cables?
We recommend storing TK801V006 cables in a climate-controlled environment between 0 °C and 40 °C with relative humidity below 75% (non-condensing). Cables stored correctly retain full performance for at least five years. For critical production lines, maintain a minimum of two units per AC800M rack in your on-site spare parts kit. NINERMAS offers blanket order arrangements for customers who need guaranteed stock allocation across multiple delivery windows.
Q4: Can NINERMAS supply TK801V006 on an ongoing basis for multi-year maintenance contracts?
Yes. NINERMAS maintains dedicated stock of ABB AC800M spare parts, including TK801V006, to support long-term maintenance agreements. We provide consistent lead times, stable pricing, and full traceability documentation for each shipment. Contact our technical sales team at sale@ninermas.com or +0086 187 5021 5667 to discuss volume pricing, consignment stock, or annual supply agreements.
| Product Series | AC800M |
|---|---|
| Country of Origin | SE |
Catalog Continuation
Nearby part numbers around TK801V00.
Use this lane when the buyer is comparing adjacent model numbers, revision-near items, or closely related spare variants within the same brand family.
SKU: TK801V003 3BSC950089R1
ABB TK801V003 3BSC950089R1 Retrofit-Compatible I/O Extension Cable
Catalog Continuation
More ABB modules in the catalog.
Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.
Catalog Continuation
Alternative parts within DCS Distributed Control Systems.
Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.