Original Industrial Spare Part

ABB GINT-6611C 68577349 Service-Ready Spare Part

Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.

SKU: GINT-6611C 68577349 PLC & Industrial Automation Modules ABB

RFQ Ready

Pricing by RFQ

How Buyers Usually Use This Page

  • Confirm the exact part number and platform family before sending the quote request.
  • Use direct email when quantity, condition, and destination are already defined internally.
  • Switch to the broader brand or category archive when you need alternates nearby.

Series Navigation

Move through the most common platform families behind this part.

ABB GINT-6611C 68577349 Service-Ready Spare Part: Spare Replacement & Downtime Risk Control

The ABB GINT-6611C (68577349) is a gate driver interface board designed for the ACS800-11 series medium-voltage AC drives. In industrial automation environments where unplanned downtime translates directly into production loss, having a verified, service-ready spare of this board on hand is a critical element of any preventive maintenance strategy. This component serves as the communication bridge between the control logic and the IGBT power modules, making it one of the highest-priority spare parts in any ACS800-11 drive cabinet.

Maintenance engineers working with ABB ACS800-11 frequency converters understand that gate driver faults — often surfaced as fault codes F-0022 or F-0023 — can halt an entire production line within seconds. The GINT-6611C 68577349 is the original replacement board that restores drive functionality without requiring firmware reconfiguration or hardware adaptation, provided the replacement unit is sourced from a verified supply chain with full traceability.

Spare Maintenance Table

Parameter Details
Part Number GINT-6611C
Reference Code 68577349
Brand ABB
Compatible Series ACS800-11 Medium Voltage AC Drive
Function Gate Driver Interface Board (IGBT Control)
Mounting Direct board replacement, DIN-rail compatible cabinet installation
Operating Voltage Per ACS800-11 drive specification (24 VDC logic supply)
Operating Temperature 0°C to +55°C (storage: -40°C to +70°C)
Application Environment Industrial drive cabinets, motor control centers, process automation panels
Origin Finland (ABB OEM)
Compatibility Verified ACS800-11 series; cross-check firmware version before installation
Maintenance Recommendation Inspect every 12 months or after any drive fault event; replace proactively in aging systems (>8 years)
Warranty 12 Months from date of shipment
Pre-shipment Testing Function-tested and inspected before dispatch

Maintenance Planning for Continuous Operation

When a GINT-6611C 68577349 gate driver board fails or is flagged during a routine drive cabinet inspection, experienced maintenance engineers know that the fault rarely exists in isolation. A comprehensive replacement workflow for the ACS800-11 drive should include a parallel inspection of the APOW-01 auxiliary power supply board, which provides the 24 VDC logic voltage that the gate driver depends on. A degraded APOW-01 can cause intermittent gate driver faults that mimic a failed GINT-6611C, leading to unnecessary board replacements.

Beyond the power supply, the AINT-02 or AINT-14 inverter control board should be checked for communication integrity, as it exchanges real-time switching commands with the gate driver. If the fiber optic links between the control board and the GINT-6611C show signal degradation — often visible as increased error counts in the drive diagnostics — both boards should be evaluated before returning the drive to service.

Procurement engineers building annual spare parts lists for ACS800-11 installations should also consider stocking the AGPS-21C gate power supply board, which works in tandem with the GINT-6611C to deliver isolated gate voltage to each IGBT module. Failure of the AGPS-21C produces symptoms nearly identical to a gate driver fault, and having both spares available eliminates diagnostic ambiguity during emergency callouts.

For sites running multiple ACS800-11 units in parallel — common in pump stations, compressor trains, and rolling mill applications — the RDCO-03 DDCS communication module and RMIO-11 motor control board are additional components that should be included in the cabinet-level spare parts kit. These modules govern the drive’s fieldbus interface and closed-loop motor control respectively, and their failure can be misdiagnosed as a gate driver issue when the root cause is upstream in the control chain.

Terminal block integrity, particularly the X1 and X2 connector rows on the GINT-6611C itself, should be inspected during every scheduled maintenance window. Loose or corroded terminals in high-vibration environments are a leading cause of intermittent gate faults. Supplementing the board replacement with new Phoenix Contact or Weidmüller terminal ferrules and verifying torque specifications on all power connections reduces the risk of repeat faults after the repair.

For older ACS800-11 installations approaching end-of-support lifecycle, a proactive spare parts strategy should extend to the NBRA-653 braking chopper module and the NINT-41 or NINT-45 inverter module interface board, both of which interact with the gate driver circuit during dynamic braking events. Ensuring these components are available in the maintenance store prevents a single-point failure from cascading into a multi-week procurement delay.

Site Replacement Workflow

Step 1 — Isolation & Lockout: Follow site LOTO procedures. Confirm that the ACS800-11 DC bus has fully discharged (minimum 5 minutes after power-off, verify with a calibrated DC voltmeter) before opening the drive cabinet.

Step 2 — Fault Documentation: Record all active and historical fault codes from the drive panel or via the DriveWindow Light PC tool before removing any boards. This data is essential for root cause analysis and warranty claims.

Step 3 — Board Removal: Disconnect the fiber optic cables from the GINT-6611C carefully — do not bend the fibers beyond the minimum bend radius. Label all connectors before removal. Remove the board by releasing the retaining clips and sliding it out of the backplane slot.

Step 4 — Visual Inspection: Before installing the replacement GINT-6611C 68577349, inspect the backplane connector for bent pins, carbon tracking, or moisture ingress. Clean with isopropyl alcohol if necessary.

Step 5 — Installation & Verification: Seat the new board firmly, reconnect all fiber optic and signal cables, and restore power. Perform a no-load test run and verify that the drive clears all gate driver fault codes. Confirm output voltage symmetry across all three phases before reconnecting the motor load.

Step 6 — System Handover: Update the maintenance log with the replacement date, board serial number, and post-replacement test results. Schedule the next inspection interval based on the site’s preventive maintenance calendar.

This workflow minimizes mean time to repair (MTTR) and ensures that the replacement is documented for audit and warranty purposes. Sites that follow a structured replacement procedure consistently report fewer repeat faults and longer intervals between unplanned outages.

Spare Parts Support FAQ

Q1: Is the GINT-6611C 68577349 compatible with all ACS800-11 variants?
The GINT-6611C 68577349 is designed for the ACS800-11 series. Compatibility should be verified against the drive’s firmware version and hardware revision before installation. Our technical team can assist with cross-referencing your drive’s nameplate data to confirm fitment prior to shipment.

Q2: What testing is performed before the board is shipped?
Every GINT-6611C 68577349 unit undergoes functional inspection and electrical testing before dispatch. Test records are available upon request and accompany the shipment documentation. This ensures that the board arrives in verified working condition, reducing on-site commissioning time.

Q3: What is the warranty coverage and what does it include?
All units carry a 12-month warranty from the date of shipment. The warranty covers manufacturing defects and functional failures under normal operating conditions. It does not cover damage resulting from incorrect installation, overvoltage events, or environmental contamination. Warranty claims are processed with full technical support.

Q4: Can you support long-term or repeat procurement for this part?
Yes. We maintain ongoing stock of ABB ACS800-series spare parts and can support scheduled procurement programs for maintenance teams managing multiple drive installations. Contact us to discuss volume pricing, lead time commitments, and consignment stock arrangements for critical spare parts.

Product Series

S800

Country of Origin

SE

Catalog Continuation

More ABB modules in the catalog.

Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.

Open this lane

Catalog Continuation

Alternative parts within PLC & Industrial Automation Modules.

Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.

Open this lane

Industrial RFQ Support

Need a fast quote for a specific part number or system family?

Send your inquiry with brand, series, quantity, condition, and destination details. We will follow up on availability, lead time, and shipping options.

CallPhone MailEmail WAChat TopBack