Original Industrial Spare Part
Siemens 1FK7042-2AF71-1RG0 Retrofit-Compatible Servo Motor
Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.
RFQ Ready
- SKU1FK7042-2AF71-1RG0
- CategoryPLC & Industrial Automation Modules
- BrandSiemens
- SupportAvailability, lead time, condition, and shipping coordination
How Buyers Usually Use This Page
- Confirm the exact part number and platform family before sending the quote request.
- Use direct email when quantity, condition, and destination are already defined internally.
- Switch to the broader brand or category archive when you need alternates nearby.
Series Navigation
Move through the most common platform families behind this part.
Product RFQ
Send this part directly for quotation.
Include quantity, required condition, destination country, and target delivery timing. Current reference: Siemens 1FK7042-2AF71-1RG0 Retrofit-Compatible Servo Motor with SKU 1FK7042-2AF71-1RG0.
Siemens 1FK7042-2AF71-1RG0 Retrofit-Compatible Servo Motor for Legacy Systems
The Siemens 1FK7042-2AF71-1RG0 is a compact, high-performance AC servo motor from the SIMOTICS S 1FK7 series, engineered for precision motion control in demanding industrial automation environments. As aging SIMODRIVE 611 and early SINAMICS S120 installations approach end-of-life, the 1FK7042-2AF71-1RG0 has become a critical retrofit solution for machine builders, OEM integrators, and plant maintenance teams seeking to extend the operational life of existing control architectures without committing to a full platform migration.
This motor is rated for 400 V AC supply, features an absolute encoder interface (single-turn or multi-turn depending on suffix configuration), and is designed for direct integration with SINAMICS S120 drive modules via DRIVE-CLiQ communication. Its compact frame size (SH 65) makes it particularly suitable for retrofitting into existing machine cabinets and gantry systems where installation space is constrained. The 1FK7042-2AF71-1RG0 delivers a rated torque of 4.0 Nm with a peak torque of 12.0 Nm, making it well-suited for axis positioning, conveyor drives, and rotary indexing applications in packaging, printing, and precision machining lines.
Upgrade Compatibility Table
| Parameter | Details / Retrofit Notes |
|---|---|
| SKU / Part Number | 1FK7042-2AF71-1RG0 |
| Series | SIMOTICS S — 1FK7 Compact |
| Rated Voltage | 400 V AC (3-phase) |
| Rated Torque | 4.0 Nm |
| Peak Torque | 12.0 Nm |
| Encoder Interface | DRIVE-CLiQ (absolute encoder, multi-turn capable) |
| Shaft / Flange | SH 65, smooth shaft with key, IM B5 flange |
| Protection Class | IP64 (standard); IP65 shaft seal optional |
| Cooling Method | Natural convection (self-cooled) |
| Compatible Drive | SINAMICS S120 (Motor Module, Single-Axis or Double-Axis) |
| Legacy Drive Compatibility | SIMODRIVE 611 (via encoder adapter); verify firmware version |
| Replaces / Upgrades From | 1FT6042, 1FK6042, early 1FK7 variants with resolver interface |
| Communication Protocol | DRIVE-CLiQ (replaces legacy resolver/TTL encoder wiring) |
| Mounting Compatibility | Direct bolt-on for SH 65 footprint; verify shaft coupling and keyway |
| Brake Option | Holding brake available (suffix -1RG0 = with brake) |
| Warranty | 12 Months — covers manufacturing defects, encoder faults, winding failures |
| Pre-Shipment Testing | Full electrical and encoder function test performed before dispatch |
| Availability | In stock — ready for immediate dispatch |
Retrofit Planning for Existing Automation Systems
Replacing a legacy servo motor in an operational production line requires careful pre-engineering to avoid extended downtime and program loss. When integrating the 1FK7042-2AF71-1RG0 into an existing SINAMICS S120 system, the first step is to verify the Motor Module type — whether a Single Motor Module (e.g., 6SL3120-1TE21-0AA3) or a Double Motor Module is in use — and confirm that the DC link voltage and current rating are compatible with the 1FK7042 power demand. The DRIVE-CLiQ cable routing from the motor to the Control Unit (CU320-2 DP or CU320-2 PN) must be planned to avoid signal interference from adjacent power cables.
For installations migrating from older SIMODRIVE 611 systems with 1FT6 or 1FK6 motors using resolver feedback, an encoder adapter module may be required during the transition period. However, the preferred upgrade path is to replace the resolver-based motor with the 1FK7042-2AF71-1RG0 and simultaneously update the drive firmware to support DRIVE-CLiQ topology. This eliminates the resolver-to-digital converter (RDC) board, reduces wiring complexity, and improves position accuracy. The SINAMICS S120 Booksize or Chassis format drive should be running firmware V4.7 or later to ensure full compatibility with the 1FK7 encoder protocol.
Terminal wiring adaptation is a key step. The power connector on the 1FK7042-2AF71-1RG0 uses a Siemens standard 4-pin power plug (U, V, W, PE), which is compatible with standard SINAMICS motor cable sets. If the existing cable harness was designed for a 1FT6 motor with a different connector housing, a cable adapter or re-termination will be required. The holding brake wiring (suffix -1RG0) connects via a separate 2-pin brake connector and must be wired to the brake control output on the Motor Module or an external brake relay. Brake release voltage is typically 24 V DC — confirm the control cabinet’s 24 V supply capacity before connection.
Backplane and rack considerations are relevant when the servo axis is part of a multi-axis SINAMICS S120 system. The Line Module (Active Line Module or Smart Line Module, e.g., 6SL3130-7TE21-6AA3) feeds the DC bus shared across all Motor Modules. Adding or replacing a motor axis may affect the total DC bus load — recalculate the power balance using Siemens SIZER or STARTER software before commissioning. If the system includes a SINAMICS S120 CU310-2 DP for single-axis control, verify that the drive object configuration in STARTER or TIA Portal matches the new motor’s electronic nameplate data, which is automatically read via DRIVE-CLiQ on first power-up.
For systems that include a SIMATIC S7-300 or S7-400 PLC communicating with the drive via PROFIBUS DP or PROFINET, the axis telegram configuration (typically Telegram 105 or 111 for servo axes) should be verified after motor replacement. HMI screens built on WinCC or TP700 Comfort panels that display axis position, speed, or torque feedback will continue to function without modification, as the data source is the drive — not the motor directly. However, if the motor replacement changes the gear ratio or encoder resolution, the position scaling parameters in the PLC motion control blocks (e.g., FB284 or S7-Technology) must be updated accordingly.
Signal isolation between the encoder DRIVE-CLiQ line and analog I/O signals from legacy sensors is recommended in environments with high electromagnetic interference. A signal isolator or ferrite core on the DRIVE-CLiQ cable near the motor connector can prevent encoder communication errors during high-load switching events. If the system also includes a SINAMICS S120 TB30 Terminal Board for analog setpoint input or digital I/O expansion, verify that the I/O address mapping in the PLC program remains consistent after the drive reconfiguration.
Downtime Control During System Migration
Minimizing production downtime during a servo motor replacement on a live automation line requires a structured pre-commissioning approach. Before the physical swap, upload and archive the complete drive parameter set from the existing SINAMICS S120 using STARTER or TIA Portal’s drive commissioning wizard. Save the project file with a version-stamped backup — this protects the original axis tuning, speed controller gains, position limits, and safety function configurations (STO, SS1, SLS if applicable via SINAMICS Safety Integrated).
During the motor exchange, keep the Control Unit (CU320-2) powered if possible to retain the drive topology in RAM. Disconnect only the Motor Module power and DRIVE-CLiQ connections to the outgoing motor. After installing the 1FK7042-2AF71-1RG0, reconnect the DRIVE-CLiQ cable — the drive will automatically read the motor’s electronic nameplate and update the motor data set. A short recommissioning sequence in STARTER (or TIA Portal V16+) is then required to accept the new motor data and re-run the motor identification routine (rotating measurement or standstill measurement depending on mechanical constraints).
If the machine uses a SIMATIC S7-1500 with S7-1500T motion control, the axis object in TIA Portal must be set back online and the homing sequence re-executed after motor replacement, since the absolute encoder reference position may have shifted during the physical swap. For vertical axes or axes with gravity load, ensure the holding brake (integrated in the 1FK7042-2AF71-1RG0 via the -1RG0 suffix) is tested for correct engagement before releasing the mechanical load. A controlled jog test at low speed (5–10% of rated speed) should be performed before returning the axis to automatic mode.
All units supplied by NINERMAS undergo full electrical testing — including insulation resistance, winding continuity, encoder signal verification, and brake function check — prior to shipment. This pre-shipment testing protocol significantly reduces the risk of commissioning failures on-site and supports a target downtime window of under 4 hours for a single-axis motor replacement on a standard SINAMICS S120 system.
Retrofit Support FAQ
Q1: Is the 1FK7042-2AF71-1RG0 a direct drop-in replacement for the 1FK6042 or 1FT6042?
The 1FK7042-2AF71-1RG0 shares the same SH 65 frame and IM B5 flange as the 1FK6042 and most 1FT6042 variants, making mechanical installation straightforward. However, the encoder interface differs — the 1FK7 uses DRIVE-CLiQ, while the 1FK6 and 1FT6 typically use resolver or TTL/HTL incremental encoders. Drive firmware and motor data set updates are required. In some cases, a DRIVE-CLiQ-capable Motor Module must replace the legacy drive axis module.
Q2: What wiring changes are needed when replacing a resolver-based motor with the 1FK7042-2AF71-1RG0?
The resolver feedback cable (typically 10-pin) is replaced by a DRIVE-CLiQ cable (standard RJ45-style connector). The power cable connector housing may differ between 1FT6 and 1FK7 — verify the pin assignment and connector type before reusing existing cable sets. The brake wiring (2-pin, 24 V DC) is generally compatible across generations. Full wiring diagrams are available in the Siemens SIMOTICS S Configuration Manual (A5E03454462).
Q3: Can NINERMAS confirm stock availability and lead time before I commit to a purchase order?
Yes. The 1FK7042-2AF71-1RG0 is held in stock and available for immediate dispatch. Contact our team at sale@ninermas.com or +0086 187 5021 5667 to confirm current inventory levels, request a proforma invoice, or discuss volume pricing for multi-axis retrofit projects. We support urgent orders with expedited shipping options.
Q4: What does the 12-month warranty cover, and what is the claims process?
The 12-month warranty covers manufacturing defects, encoder communication failures, winding insulation breakdown, and brake mechanism faults under normal operating conditions. It does not cover damage caused by incorrect installation, overvoltage, or mechanical overload. To initiate a warranty claim, contact sale@ninermas.com with the order reference, fault description, and any available drive fault codes. NINERMAS will arrange return logistics and provide a replacement or repaired unit within an agreed lead time.
| Product Series | SINAMICS |
|---|---|
| Country of Origin | DE |
Catalog Continuation
More Siemens modules in the catalog.
Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.
SKU: 6ES7134-6HD00-0BA1
Siemens 6ES7134-6HD00-0BA1 Safety-Reliable Analog Input
SKU: A5E00110975 G150G130S120
SIEMENS A5E00110975 Safety Drive Module for Critical Sites
SKU: 1FK7042-5AF71-1EH0
Siemens 1FK7042-5AF71-1EH0 SIMOTICS S Retrofit Servo Motor
SKU: 6AV2128-3QB06-0AX1
Siemens 6AV2128-3QB06-0AX1 Retrofit-Compatible HMI Panel
Catalog Continuation
Alternative parts within PLC & Industrial Automation Modules.
Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.