Original Industrial Spare Part

Phoenix Contact QUINT-PS/1AC/48DC/5 2866679 Safety Power Supply

Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.

SKU: QUINT-PS/1AC/48DC/5 2866679 SIS Safety & Redundancy Systems Phoenix Contact

RFQ Ready

Pricing by RFQ

How Buyers Usually Use This Page

  • Confirm the exact part number and platform family before sending the quote request.
  • Use direct email when quantity, condition, and destination are already defined internally.
  • Switch to the broader brand or category archive when you need alternates nearby.

Series Navigation

Move through the most common platform families behind this part.

Phoenix Contact QUINT-PS/1AC/48DC/5 2866679: Safety-Reliable 48VDC Power Supply for Critical Industrial Control Sites

The Phoenix Contact QUINT-PS/1AC/48DC/5 (Part No. 2866679) is a single-phase AC-input, 48 VDC / 5 A industrial power supply engineered for the most demanding control environments. As a core member of the QUINT Power series, it delivers regulated, stable DC power to safety-critical circuits, field instrumentation, and communication backbones where an unplanned power interruption is never acceptable. Every unit shipped by NINERMAS undergoes pre-shipment functional testing and is backed by a 12-month warranty, ensuring you receive a verified, field-ready component.

Safety Reliability Table

Parameter Specification
Part Number 2866679
SKU / Model QUINT-PS/1AC/48DC/5
Brand / Series Phoenix Contact / QUINT Power
Input Voltage 85 – 264 V AC (1-phase, universal range)
Output Voltage 48 V DC (adjustable)
Output Current 5 A continuous
Output Power 240 W
Static Boost (SFB) Up to 3× rated current for circuit-breaker tripping
Efficiency > 93 % (typical)
Protection Class IP20 (DIN-rail mount)
Operating Temperature −25 °C to +70 °C
Humidity 5 – 95 % RH, non-condensing
EMC / Interference Immunity EN 61000-4 series; surge, EFT, ESD, conducted immunity
Safety Approvals UL 508, CE, cULus, GL
Diagnostics DC-OK relay contact, LED status indicator
Parallel Operation Supported (redundancy / increased current)
Warranty 12 Months (NINERMAS pre-shipment tested)
Origin Germany

Control Cabinet Risk Reduction Strategy

In continuous-process industries, the power supply is the heartbeat of every control cabinet. A voltage sag, surge, or outage at the 48 VDC rail can cascade into relay mis-trips, PLC watchdog resets, and full-line shutdowns. The QUINT-PS/1AC/48DC/5 2866679 addresses this risk through its patented Static Boost (SFB) technology, which delivers up to three times the rated output current for a brief period — enough to reliably trip downstream miniature circuit breakers and isolate faults without nuisance tripping of the supply itself.

For cabinet designers building redundant power architectures, the QUINT-PS/1AC/48DC/5 can be paralleled with a Phoenix Contact QUINT-DIODE/40AC/2X20/1X40 redundancy module, ensuring seamless load transfer if one supply degrades. On the load side, 48 VDC field devices — including Phoenix Contact MINI MCR-SL signal conditioners, MACX analog input isolators, and PSR safety relay modules — operate with full stability when powered from a regulated QUINT rail.

Surge protection at the cabinet entry point is equally critical. Pairing the QUINT-PS/1AC/48DC/5 with a Phoenix Contact TRABTECH PT 2X2-BE/S-48DC surge arrester on the DC output bus shields the downstream instrumentation from transient overvoltages caused by nearby motor starts, welding equipment, or lightning-induced surges on field cables. For installations with long cable runs to remote I/O panels, adding a Phoenix Contact FLKM 50 connector system or IB IL 24 DI 16 Inline digital input terminal at the field junction box further reduces signal integrity risks.

Communication infrastructure within the same cabinet — such as Phoenix Contact FL SWITCH 2005 managed Ethernet switches or RAD-ISM-900 wireless gateways — also benefits from a stable, low-ripple 48 VDC supply. Voltage ripple and noise on the power rail are primary causes of intermittent Modbus RTU framing errors and PROFIBUS DP token-loss events; the QUINT-PS/1AC/48DC/5’s active power factor correction and tight output regulation keep ripple below 50 mV peak-to-peak, protecting communication uptime.

For safety loop integrity, the QUINT-PS/1AC/48DC/5 supports the power requirements of Phoenix Contact PSRmini safety relay chains and SAFEMASTER S safety controllers, where a stable supply voltage is a prerequisite for SIL 2 / SIL 3 loop validation. The built-in DC-OK relay contact can be wired directly into a PLC digital input or a Phoenix Contact TRIO-PS monitoring module to trigger an alarm or controlled shutdown sequence before a brownout condition causes an uncontrolled process trip.

Critical Industrial Safety Applications

Petrochemical & Refinery Plants: In hazardous-area control rooms and marshalling cabinets, the QUINT-PS/1AC/48DC/5 powers field transmitters, solenoid valve drivers, and ESD (Emergency Shutdown) relay circuits. Its wide AC input range (85–264 V AC) tolerates the voltage fluctuations common on generator-backed plant power systems, while the SFB current boost ensures that any downstream short circuit is cleared rapidly — preventing arc flash escalation in Zone 2 environments.

Electric Power Generation & Substation Automation: Substation protection panels require a power supply that maintains output during AC input dips caused by grid switching events. The QUINT-PS/1AC/48DC/5 holds output regulation within ±1 % during input transients, protecting IED (Intelligent Electronic Device) logic and SCADA communication cards from brownout-induced resets that could mask a protection relay operation.

Mining & Mineral Processing: Underground and surface mining control systems face extreme vibration, dust ingress, and wide temperature swings. Mounted on a DIN rail inside a sealed enclosure, the QUINT-PS/1AC/48DC/5 operates reliably from −25 °C to +70 °C, covering both cold-start conditions in unheated surface buildings and high-ambient temperatures inside motor control centers near crushers and conveyors.

Water & Wastewater Treatment: SCADA-controlled pump stations and chemical dosing systems depend on uninterrupted 48 VDC power for flow transmitters, pH analyzers, and remote terminal units (RTUs). The QUINT-PS/1AC/48DC/5’s parallel redundancy capability allows operators to configure an N+1 power architecture, eliminating the power supply as a single point of failure in critical water infrastructure.

Metallurgy & Steel Production: Rolling mill and furnace control cabinets operate in environments with intense electromagnetic interference from large variable-frequency drives and induction heating systems. The QUINT-PS/1AC/48DC/5’s compliance with EN 61000-4 immunity standards — including 2 kV surge (EN 61000-4-5) and 4 kV EFT (EN 61000-4-4) — ensures stable operation even when installed adjacent to high-power drive panels.

Port & Marine / Shipboard Systems: Crane control systems and shipboard automation panels require power supplies certified to marine standards. The QUINT-PS/1AC/48DC/5 carries GL (Germanischer Lloyd) approval, making it suitable for shipboard control panels, offshore platform junction boxes, and port crane PLC cabinets where salt-air corrosion and vessel motion add to the environmental challenge.

Safety and Quality FAQ

Q1: Does the QUINT-PS/1AC/48DC/5 2866679 come with a warranty?
Yes. Every unit supplied by NINERMAS carries a 12-month warranty covering manufacturing defects and functional failures under normal operating conditions. Warranty claims are processed directly through NINERMAS with no requirement to return the unit to the original manufacturer.

Q2: Is pre-shipment testing performed on each unit?
Yes. Each QUINT-PS/1AC/48DC/5 2866679 is functionally tested before dispatch — including output voltage verification, load regulation check, and DC-OK contact operation — to confirm the unit meets Phoenix Contact specifications. A test record is available upon request.

Q3: Is this unit compatible with existing QUINT Power series installations?
Yes. The QUINT-PS/1AC/48DC/5 2866679 is a direct form-fit-function replacement for earlier QUINT Power 48 VDC / 5 A variants. It uses the standard 45 mm DIN-rail footprint and the same terminal block pinout, allowing drop-in replacement without cabinet rewiring. It is also compatible with Phoenix Contact QUINT redundancy modules and QUINT UPS buffer modules.

Q4: Can long-term supply continuity be guaranteed for this spare part?
NINERMAS maintains stock of the QUINT-PS/1AC/48DC/5 2866679 as a long-lifecycle industrial spare. For customers with planned maintenance schedules or multi-year service contracts, we support blanket order arrangements and reserved stock allocation to ensure availability when needed, minimizing the risk of extended lead times disrupting planned shutdowns.

Product Series

Other series

Country of Origin

DE

Catalog Continuation

More Phoenix Contact modules in the catalog.

Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.

Open this lane

Catalog Continuation

Alternative parts within SIS Safety & Redundancy Systems.

Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.

Open this lane

Industrial RFQ Support

Need a fast quote for a specific part number or system family?

Send your inquiry with brand, series, quantity, condition, and destination details. We will follow up on availability, lead time, and shipping options.

CallPhone MailEmail WAChat TopBack