Original Industrial Spare Part
Bently Nevada 3500/20 Rack Interface Module | 3500/20-01-02-00
Verify the part, confirm the platform family, and move straight into quotation with the right commercial details.
RFQ Ready
- SKU3500/20-01-02-00
- CategoryTSI & Rotating Machinery Monitoring
- BrandBently Nevada
- SupportAvailability, lead time, condition, and shipping coordination
How Buyers Usually Use This Page
- Confirm the exact part number and platform family before sending the quote request.
- Use direct email when quantity, condition, and destination are already defined internally.
- Switch to the broader brand or category archive when you need alternates nearby.
Series Navigation
Move through the most common platform families behind this part.
Product RFQ
Send this part directly for quotation.
Include quantity, required condition, destination country, and target delivery timing. Current reference: Bently Nevada 3500/20 Rack Interface Module | 3500/20-01-02-00 with SKU 3500/20-01-02-00.
Bently Nevada 3500/20 Rack Interface Module Overview
The Bently Nevada 3500/20 Rack Interface Module (Part Number: 3500/20-01-02-00) serves as the primary communication gateway between the 3500 monitoring rack and external configuration and data acquisition systems. This critical component enables seamless integration of vibration monitoring, condition-based maintenance, and real-time machinery protection protocols.
Technical Specifications
- Model: 3500/20-01-02-00
- Function: Rack Interface & Communication Gateway
- Compatibility: Bently Nevada 3500 Series Monitoring Systems
- Communication Protocols: Modbus, Proprietary Protocol Support
- Configuration Interface: RS232/RS485 Serial Communication
- Operating Temperature: -30 °C to +65 °C (-22 °F to +149 °F)
- Power Consumption: Low power design for continuous operation
- Compliance: API 670, ISO 20816 aligned
Key Applications
The 3500/20 Rack Interface Module is engineered for demanding industrial environments requiring continuous machinery health monitoring:
- Turbomachinery vibration monitoring and protection
- Rotating equipment condition assessment in power generation facilities
- Oil & gas compressor and pump monitoring systems
- Critical process equipment surveillance in petrochemical plants
- Steam and gas turbine protection systems
- Industrial fan and blower monitoring applications
Technical Advantages
Seamless System Integration: The 3500/20 module provides the essential communication backbone for your entire 3500 rack configuration, enabling real-time data exchange with SCADA systems, DCS platforms, and condition monitoring software.
Configuration Flexibility: Supports both local and remote configuration via 3500 Rack Configuration Software, allowing engineers to modify alarm setpoints, channel assignments, and communication parameters without system downtime.
Diagnostic Capabilities: Built-in self-diagnostics continuously verify module health, communication integrity, and rack status, ensuring maximum system reliability and early fault detection.
Common Technical Questions
Q: Can the 3500/20 interface with third-party monitoring systems?
A: Yes, the module supports Modbus protocol communication, enabling integration with most industrial automation and monitoring platforms. Proprietary protocols are also available for enhanced functionality with Bently Nevada software suites.
Q: What configuration software is required?
A: The 3500/20 requires Bently Nevada 3500 Rack Configuration Software for initial setup and parameter modification. Software licensing and compatibility information is available upon request.
Q: Is hot-swapping supported?
A: The 3500/20 Rack Interface Module does not support hot-swap operation. Rack power must be removed before module installation or replacement to prevent damage and ensure proper initialization.
Q: What is the typical communication response time?
A: Communication latency is typically under 100ms for standard Modbus queries, ensuring real-time data availability for critical machinery protection applications.
Quality Assurance & Warranty
Every Bently Nevada 3500/20 module supplied by Industrial Control Hub undergoes rigorous factory calibration and quality verification. Each unit is tested for communication integrity, protocol compliance, and environmental specifications before shipment.
Warranty Coverage: 12-month comprehensive warranty covering manufacturing defects and functional failures. Extended warranty options and technical support packages are available.
Related Products
Enhance your 3500 monitoring system with these complementary modules:
| Product | Description | Link |
|---|---|---|
| Bently Nevada 3500/50 | Tachometer Module for speed monitoring | View Product |
| Bently Nevada 3500/42 | Proximitor/Seismic Monitor for vibration analysis | View Product |
| Bently Nevada 3500/92 | Communication Gateway for network integration | View Product |
Why Choose Industrial Control Hub?
- Factory-calibrated OEM components with full traceability
- Global logistics network ensuring fast delivery
- Technical support from experienced instrumentation engineers
- Competitive pricing with volume discount programs
- ISO-certified quality management processes
© 2025 INDUSTRIAL CONTROL HUB. All rights reserved.
Original Source: https://www.indctrlhub.com
Contact: sales@indctrlhub.com | +0086 18359243191
| Product Series | 3500 Series |
|---|---|
| Country of Origin | US |
Catalog Continuation
More Bently Nevada modules in the catalog.
Use the brand lane to compare nearby part numbers, platform-adjacent modules, and other inquiry-ready listings before sending your final RFQ.
Catalog Continuation
Alternative parts within TSI & Rotating Machinery Monitoring.
Stay inside the same system family when you need substitutes, adjacent modules, or a broader shortlist for procurement review.
SKU: 51305980-184 REVB
Honeywell 51305980-184 REVB | TDC 3000 Industrial Cable Assembly
SKU: 51307599-176 REVA
Honeywell 51307599-176 REV A | TDC 3000 DCS Cable Assembly
Reviews
There are no reviews yet.