Bently Nevada 3300/16-02-01-00-00 XY/Gap Dual Vibration Monitor

Bently Nevada 3300/16-02-01-00-00 – Advanced XY/Gap Dual Vibration Monitor

The Bently Nevada 3300/16-02-01-00-00 represents a sophisticated dual-channel vibration monitoring solution designed for critical rotating machinery applications. This rack-mounted module simultaneously measures radial vibration in two perpendicular planes (X and Y axes) plus gap voltage, delivering comprehensive shaft displacement analysis for turbomachinery protection systems.

Core Technical Parameters

• Part Number: 3300/16-02-01-00-00
• Product Line: Bently Nevada 3300 Series
• Channel Configuration: Dual-channel (XY) with gap measurement
• Input Type: Proximitor sensor signals
• Output Signal: 4-20 mA proportional to vibration amplitude
• Measurement Range: 0-500 mils pk-pk (configurable)
• Frequency Response: 10 Hz to 1 kHz (-3 dB)
• Alarm Relays: Two SPDT relays per channel (Alert/Danger)
• Power Supply: -24 VDC nominal (18-30 VDC range)
• Operating Temperature: 0 °C to +65 °C (32 °F to 149 °F)
• Compliance Standards: API 670, ISO 20816
• Module Dimensions: Single-width 3300 rack module

Industrial Application Scenarios

Steam & Gas Turbine Monitoring: Continuously tracks journal bearing vibration in both horizontal and vertical planes, enabling early detection of rotor imbalance, misalignment, and bearing wear in power generation turbines operating at speeds from 1,800 to 10,000 RPM.

Centrifugal Compressor Protection: Monitors radial shaft displacement in critical compressor trains for petrochemical and gas processing facilities, providing trip-level protection against catastrophic bearing failures and rotor rubs.

Large Motor Surveillance: Safeguards high-horsepower induction and synchronous motors in mining, steel production, and water treatment plants by detecting mechanical looseness, soft foot conditions, and resonance issues through XY orbit analysis.

Pump Condition Monitoring: Protects high-energy pipeline pumps and boiler feed pumps by measuring shaft runout and dynamic vibration, distinguishing between hydraulic instabilities and mechanical faults.

Integrated Monitoring Solutions

The 3300/16-02-01-00-00 serves as the signal conditioning and alarm logic hub within comprehensive machinery protection architectures:

• Orbit Generation: Dual-channel design enables real-time XY orbit plotting for advanced diagnostic analysis of rotor behavior, precession patterns, and clearance issues
• Gap Voltage Monitoring: Simultaneous gap measurement validates proximitor sensor health and target surface quality, ensuring measurement integrity
• Configurable Alarm Logic: Independent alert and danger setpoints per channel with adjustable time delays prevent nuisance trips while ensuring rapid response to genuine fault conditions
• System Integration: 4-20 mA outputs interface seamlessly with DCS, PLC, and SCADA systems for centralized monitoring and historical trending
• Buffered Outputs: Provides conditioned vibration signals to external analyzers and data acquisition systems without loading the primary measurement circuit

Installation & Configuration Guidelines

Designed for installation in standard Bently Nevada 3300 series 19-inch racks. Requires two 8mm or 11mm proximity probes mounted 90 ° apart on the monitored bearing housing, connected via extension cables to proximitor housings. Module configuration performed through front-panel potentiometers for full-scale range, alarm setpoints, and time delays. LED indicators provide at-a-glance status of OK, Alert, and Danger conditions for each channel.

Quality & Certification

Manufactured to Bently Nevada’s stringent quality standards with full API 670 fourth edition compliance for machinery protection systems. Each unit undergoes comprehensive factory testing including frequency response verification, alarm relay timing validation, and environmental stress screening. Supplied with calibration documentation and configuration record sheet.

Common Technical Questions

Q: What is the difference between the 3300/16-02 and 3300/16-03 models?
A: The 3300/16-02 provides basic XY/Gap monitoring with analog outputs, while the 3300/16-03 adds digital communication capabilities and enhanced diagnostics. The -01-00-00 suffix indicates specific alarm relay and output configurations.

Q: Can this monitor work with both 8mm and 11mm proximity probes?
A: Yes, the 3300/16-02-01-00-00 accepts standard Bently Nevada proximitor outputs from both 8mm and 11mm probe systems. Scale factor adjustments are made via internal potentiometers to match the specific probe sensitivity.

Q: How do I interpret XY orbit patterns from this monitor?
A: Connect the X and Y channel outputs to an oscilloscope in XY mode or to a compatible orbit display device. The resulting Lissajous pattern reveals rotor behavior – circular orbits indicate balance issues, elliptical patterns suggest misalignment, and figure-8 patterns may indicate looseness or cracked shafts.

Q: What is the typical alarm setpoint configuration for turbomachinery?
A: For API 670 compliance, Alert is commonly set at 25-50% of bearing clearance and Danger at 50-75% of clearance. Specific values depend on machine type, operating speed, and manufacturer recommendations. Consult machinery vendor documentation for optimal setpoints.

Q: Does this module require periodic recalibration?
A: The 3300/16-02-01-00-00 maintains calibration stability over its operational life. Annual verification of alarm setpoints and relay operation is recommended as part of preventive maintenance programs, but full recalibration is typically not required unless the unit undergoes repair.

Warranty & Technical Support

Covered by a comprehensive 12-month manufacturer warranty against defects in materials and workmanship from date of shipment. Technical support available for installation assistance, configuration guidance, troubleshooting, and system integration planning. Replacement modules available for rapid turnaround in critical applications.

Compatible System Components

© 2025 NINERMAS COMPANY LIMITED. All rights reserved.
Original Source: https://www.ninermas.com
Contact: sales@ninermas.com | +0086 187 5021 5667